Sliding patio doors supplied to Swansea
Yes — aluminium and uPVC sliding patio doors are supplied to Swansea supply only, in 2 and 4 pane arrangements, made to size and delivered in about a week against an industry standard of 8–12 weeks.
29 designs, made to your opening sizes and delivered 2–3 working days once made into Swansea — 137 road miles from where they are built. Installation available and priced separately.
Specification
| Configuration | 2, 3 and 4 pane; inline and lift-and-slide |
| Sightline | From approx. 35mm on a slim interlock |
| Glazing | 28mm toughened sealed unit, larger units available |
| Running gear | Stainless steel rollers, adjustable |
| Threshold | Standard and low-threshold options |
| Max pane | Approx. 3000mm high subject to weight |
| Guarantee | 10 years frame, 10 years sealed unit |
| Designs held | 29 |
| Delivery to Swansea | Zone C — 2–3 working days once made |
Why this suits Swansea
A slider keeps every pane in the opening rather than stacking into the room, so it suits the narrower rear elevations common across Swansea.
Victorian terraces, interwar semis, and coastal Gower stock. Direct Atlantic and Channel exposure with heavy driving rain. The failure that tends to come first is Water ingress and corrosion on exposed westerly and coastal elevations — worth knowing before you decide between repairing what you have and replacing it.
One of the wettest urban areas in the UK — specify the highest weather ratings. Order to the structural opening, measured in three places, smallest figure wins. How to measure properly.
Also supplied to Swansea
Sliding patio doors in Swansea — questions
What if the delivery is damaged?
Check it on the vehicle and note anything on the paperwork before the driver leaves. Damage reported at that point is replaced; damage found a fortnight later is much harder to resolve.
How long does delivery to Swansea take?
About a week from order for standard products in standard finishes, then 2–3 working days once made for the run to Swansea. Special RAL colours and made-to-measure joinery take longer, and you get a firm date before you pay.
Do you install in Swansea?
Installation is available and quoted as a separate line, so you can see exactly what the fitting costs against the product. The product still arrives on the supply-only lead time; the fitting date depends on the diary.
What size do I order to?
The structural opening — brick to brick, lintel to cill. Measure in three places and use the smallest figure. Do not take a fitting tolerance off yourself; that is done at our end.
What usually needs replacing in Swansea?
Water ingress and corrosion on exposed westerly and coastal elevations. That is the pattern across most of the county, though an individual property can differ.