Bi-fold doors › Perth and Kinross
Bi-fold doors supplied to Perth and Kinross
Yes — aluminium bi-fold doors are supplied to Perth and Kinross supply only in 2 to 5 panes, made to your structural opening and delivered in about a week rather than the 8–12 weeks the trade usually quotes. Installation available separately.
14 designs, made to your opening sizes and delivered 3–5 working days once made into Perth and Kinross — 351 road miles from where they are built. Installation available and priced separately.
Specification
| Configuration | 2 to 5 panes, any opening split, in or out opening |
| Sightline | Approx. 100–120mm on a mid-stile |
| Running gear | Top-hung stainless rollers |
| Threshold | Weathered or low-threshold rebated |
| Glazing | 28mm toughened sealed unit |
| Max leaf | Approx. 1200mm wide, 2500mm high |
| Guarantee | 10 years frame, 10 years sealed unit |
| Designs held | 14 |
| Delivery to Perth and Kinross | Zone E — 3–5 working days once made |
Why this suits Perth and Kinross
Bi-folds fold the whole opening away, which is why they suit the rear extensions that dominate improvement work in Perth and Kinross. Worth knowing: they stack, so you lose the leaf width off the reveal.
Stone-built town and rural stock, Georgian and Victorian. Upland exposure with high rainfall in the west. The failure that tends to come first is Driven rain and rot in original timber — worth knowing before you decide between repairing what you have and replacing it.
Scottish standards apply; a long run from the depot. Order to the structural opening, measured in three places, smallest figure wins. How to measure properly.
Delivered across Perth and Kinross
Every postcode in Perth and Kinross is covered — delivery detail for Perth and Kinross.
Also supplied to Perth and Kinross
Bi-fold doors in Perth and Kinross — questions
What size do I order to?
The structural opening — brick to brick, lintel to cill. Measure in three places and use the smallest figure. Do not take a fitting tolerance off yourself; that is done at our end.
What usually needs replacing in Perth and Kinross?
Driven rain and rot in original timber. That is the pattern across most of the county, though an individual property can differ.
Can I get a price without giving you my details?
Prices are published on the product pages with an inc and ex VAT switch. For your exact sizes we need to price it, but you can see the range before you speak to anyone.
What if the delivery is damaged?
Check it on the vehicle and note anything on the paperwork before the driver leaves. Damage reported at that point is replaced; damage found a fortnight later is much harder to resolve.
How long does delivery to Perth and Kinross take?
About a week from order for standard products in standard finishes, then 3–5 working days once made for the run to Perth and Kinross. Special RAL colours and made-to-measure joinery take longer, and you get a firm date before you pay.