Aluminium windows › Renfrewshire
Aluminium windows supplied to Renfrewshire
Yes — we supply aluminium windows to Renfrewshire on a supply-only basis, made to your opening sizes and delivered in about a week rather than the 8–12 weeks that is normal in this trade. Any RAL colour. Installation is available and priced separately.
91 designs, made to your opening sizes and delivered 3–5 working days once made into Renfrewshire — 321 road miles from where they are built. Installation available and priced separately.
Specification
| Frame depth | approx. 55mm — roughly 15–20% more glass than a 70mm uPVC frame |
| Thermal break | Polyamide, standard on every frame |
| U-value | 1.2–1.4 W/m²K for the window, glass dependent |
| Finish | Polyester powder coat, any RAL, dual colour available |
| Glazing | 28mm sealed unit, argon filled, warm-edge spacer |
| Opening types | Casement, flush casement, tilt and turn, fixed light |
| Guarantee | 10 years on the frame, 10 on the sealed unit |
| Designs held | 91 |
| Delivery to Renfrewshire | Zone E — 3–5 working days once made |
Why this suits Renfrewshire
Aluminium holds a slimmer section than uPVC at the same structural performance, so a like-for-like replacement puts noticeably more glass in the same hole. In Renfrewshire that matters most on atlantic-approach exposure with high rainfall.
Sandstone tenements, interwar and postwar estates. Atlantic-approach exposure with high rainfall. The failure that tends to come first is Rot in original timber and damp in solid walls — worth knowing before you decide between repairing what you have and replacing it.
Scottish standards apply. Order to the structural opening, measured in three places, smallest figure wins. How to measure properly.
Delivered across Renfrewshire
Every postcode in Renfrewshire is covered — delivery detail for Renfrewshire.
Also supplied to Renfrewshire
Aluminium windows in Renfrewshire — questions
What if the delivery is damaged?
Check it on the vehicle and note anything on the paperwork before the driver leaves. Damage reported at that point is replaced; damage found a fortnight later is much harder to resolve.
How long does delivery to Renfrewshire take?
About a week from order for standard products in standard finishes, then 3–5 working days once made for the run to Renfrewshire. Special RAL colours and made-to-measure joinery take longer, and you get a firm date before you pay.
Do you install in Renfrewshire?
Installation is available and quoted as a separate line, so you can see exactly what the fitting costs against the product. The product still arrives on the supply-only lead time; the fitting date depends on the diary.
What size do I order to?
The structural opening — brick to brick, lintel to cill. Measure in three places and use the smallest figure. Do not take a fitting tolerance off yourself; that is done at our end.
What usually needs replacing in Renfrewshire?
Rot in original timber and damp in solid walls. That is the pattern across most of the county, though an individual property can differ.